Site Search Results

You can design your own custom glazes, stains, washes, and varnishes with General Finishes intermixable water-based products. **Do not mix General Finishes Glaze Effects with General Finishes Water Based Stain (including Pre-Stain Natural) See tips and recipes below.

For all of the following mixes, GF recommends the following two steps:

Q: Which 12 colors will remain in the Milk Paint line?

There are three ways:

Yes, there are a couple of ways. Dye Stain Reducer is the clear base that we use when manufacturing General Finishes Dye Stains. The Reducer is made first, then the dye color is added.

It is easy to make your own custom color Dye Stain by adding in 10% increments of Dye Stain color to Reducer until you achieve the color you want. It is not possible to mix too much of our Dye Stain and Reducer together.

Yes, one of its uses is to dilute dye stain colors. Dye Stain reducer is the clear base the we use when manufacturing our dye stains. We make the reducer first, then add the dye color.

It is easy to make your own custom color Dye Stain by adding in 10% increments until you achieve the color you want. It is not possible to mix too much of our dye stain or reducer together.

Additionally, General Finishes Water Based Stains can be mixed into the reducer, which will lighten the color and thin the viscosity so it will penetrate deeper into the wood.

Yes, you can mix similar products together at any ratio to make more color options.

You can also mix with 10% General Finishes Liquid Oil Based Wood Penetrating Stains to obtain a slightly thinner stain than the normal Gel Stain formula.