Site Search Results

1. Immediately, decant the finish to another container that has an airtight lid. The bottom of the existing can is compromised.
2. Here is an easy fix to resolve this issue with future use of the Fillon Mixing Lid, you will need to make adjustments to the height.
3. Lift off the top.
4. Add 4 5/16th washers and replace the top.

You can use oxalic acid when trying to remove discoloration or water damaged spots. The entire surface needs to be treated and then neutralized with a clean water wash.

Mix 4 oz. per quart of warm water. Wipe the entire surface down with the mixture and allow to dry completely. Rinse table with a clean damp rag. Finish sand with 180 grit followed by the final sanding schedule below. Make sure to wear a  dust mask when sanding wood treated with oxalic acid - the dust can irate the nose. 

Milk Paint is not like a filler-based wall paint. It is engineered for high-use applications such as tabletops and cabinets that require considerably more durability than a wall. The resins that make Milk Paint durable change the properties of it, so you have to handle it differently.

The type of applicator you use will change the thickness of the film and affect the appearance GF Milk Paint.

General Finishes does not think light scratches on a door are so significant that it would be necessary for you to strip down the finish. 

Instead of stripping, GF recommends that you try:

A high-performance 2K coating has a base specifically formulated to be catalyzed with Isocyanates to crosslink the polymer fully. This catalyst provides superior performance over 1 K coatings that have been hardened with PolyAzuradine or Carbodiiamide. To create Enduro Tintable 2K; General Finishes tested over 30 polymers, resins, and other ingredients sourced from around the world.